Technology Design

Independent Security Technology Design

Hand holding a tablet showing a grid of security camera feeds, security technology design
Employees walking through optical turnstiles in a modern office lobby

Security technology that is built in, not added on.

SRMC designs integrated security technology systems based on your organization’s specific risks, operational needs, culture, and facilities. From access control and video surveillance to intrusion detection, emergency communications, visitor management, and security operations centers, we develop solutions that work together as a cohesive system. We work alongside your architects, engineers, and construction team throughout programming, design, construction, and commissioning. As an independent, vendor-neutral security consulting firm, SRMC does not sell, install, or maintain security systems or accept commissions from manufacturers or integrators. Our designs are based on one thing: what your organization actually needs.

When Organizations Bring In an Independent Designer

Organizations typically come to SRMC for security technology design when they are facing one or more of these challenges.

Planning a new building or major renovation.

Security needs to be part of the design from the beginning, not something added after the building plans are largely complete.

Trying to compare very different bids.

Integrators have proposed different systems, products, and approaches, making an apples-to-apples comparison nearly impossible without a common specification.

Managing systems that were purchased in pieces.

Different departments and facilities have acquired technology independently, leaving the organization with disconnected platforms and inconsistent standards.

Trying to create consistency across multiple locations.

The organization needs common security technology standards and a scalable architecture that can be applied across its portfolio.

Replacing aging technology.

Existing systems are approaching the end of their useful life and the organization needs a thoughtful migration strategy rather than another short-term fix.

Realizing security was overlooked during design.

The project is already moving forward, but no one has taken a comprehensive look at whether the security technology design meets the organization’s needs.

What the Service Includes

Security should be incorporated during programming alongside architectural, civil, structural, mechanical, electrical, and plumbing disciplines. Before the building design is established, SRMC works with the project team to define how employees, visitors, vendors, and deliveries will enter and move through the facility; where public access ends; which areas require controlled access; and whether reception, screening, or other security measures are needed. For existing facilities, we begin with a security risk and needs assessment to evaluate current conditions, facility plans, circulation patterns, and anticipated operations.

SRMC develops a basis of design that translates your security objectives, operational requirements, culture, and risk tolerance into clear design criteria. This provides the project team with a common framework for designing the security systems and establishes preliminary budget requirements for the recommended technologies.

SRMC develops security device layouts, construction drawings, and technical specifications that clearly define system requirements. The result is a coordinated bid package that allows security integrators to price the same scope of work, giving the owner a more reliable basis for comparing proposals, technology, and costs.

SRMC coordinates electrified door hardware with the access control system, architect, and door hardware consultant to ensure each controlled opening has the appropriate locking, monitoring, and signaling functions. We also coordinate with architectural, IT, electrical, life safety, and audiovisual disciplines to ensure infrastructure requirements are incorporated and security systems function as an integrated part of the facility.

SRMC supports the competitive bidding process through pre-proposal meetings, bidder questions and clarifications, proposal review, bid analysis, and recommendations for award. Our independent role helps the owner evaluate proposals based on compliance with the design, technical requirements, qualifications, and overall value.

During construction, SRMC provides contractor coordination, submittal and shop drawing reviews, responses to technical questions, project oversight, acceptance testing, and commissioning support. Our role is to help ensure the installed security systems align with the approved design, operate as intended, and are ready before occupancy.

For larger or more complex projects, SRMC can provide ongoing peer review of architectural, civil, structural, electrical, and technology design documents to verify that security requirements are appropriately incorporated throughout the project. When an organization does not have the internal security resources to support a major capital project, SRMC can also serve as the owner’s security representative, providing an independent security voice from planning and design through construction and commissioning.

How the Work Gets Done

Discovery Call. We begin with a conversation to understand your project, where it is in the planning or design process, and what you need your security systems to accomplish.
Scope and Proposal. We define the facilities and systems to be included, along with the specific phases of planning, design, bidding, construction, and commissioning that SRMC will support.
Programming and Basis of Design. We establish the security requirements and develop a basis of design that documents the design criteria, system objectives, and preliminary budget.
Design and Specifications. We develop security device layouts, construction drawings, and Division 28 specifications while coordinating with the architect, engineers, and other consultants throughout the design process.
Bidding and Award. We support pre-proposal meetings, respond to bidder questions, review and compare proposals, and provide an independent recommendation for award.
Construction and Commissioning. We review submittals and shop drawings, coordinate with contractors, observe system testing, and support commissioning to help ensure the installed systems meet the approved design and perform as intended.

What You Get

A design that fits your organization.

Security systems designed around your facilities, operations, risks, and culture, and integrated into the project from the beginning rather than added as an afterthought.

Clear documents that support competitive bidding.

Detailed drawings and specifications that define the scope, reduce assumptions, produce more comparable proposals, and minimize surprises during construction.

Independent, vendor-neutral recommendations.

Objective guidance on security technologies, manufacturers, and products based solely on your requirements, with no financial interest in what you ultimately select.

Systems that perform as intended.

Testing and commissioning help verify that the installed systems align with the approved design and meet your operational and performance requirements before final acceptance.

Fewer changes, delays, and added costs.

Engaging SRMC early helps identify security requirements before critical design decisions are made, reducing the potential for redesign, change orders, and costly compromises later in the project.

Systems We Design

  • Access control and integration with identity and credentialing systems
  • Electrified door hardware integration
  • Emergency and duress alarms
  • Emergency communications and mass notification
  • Intrusion detection
  • Perimeter protection
  • Protective glazing, ballistic-rated doors, and related construction specifications
  • Screening technologies
  • Security operations centers and global security operations centers
  • Vehicle access
  • Video intercoms
  • Video surveillance and video management
  • Visitor management

Engineers marking up architectural drawings with a hard hat on the table

Independent by Design

Engineering firms often begin with the systems that need to be designed. SRMC begins with the risks that need to be addressed. We develop security programs that bring together people, processes, technology, and the built environment to create a comprehensive security solution. Because we do not sell, install, or maintain security systems or accept commissions or incentives from manufacturers or integrators, we remain your independent advocate from design and procurement through vendor selection and implementation.

Questions Clients Ask About Technology Design

An integrator sells, installs, and maintains security systems. SRMC independently determines what your organization needs before an integrator is selected. We evaluate risk, establish requirements, design the solution, develop specifications, and help you select an integrator to implement it. Because we do not sell or install systems, our recommendations remain independent and vendor neutral.

SRMC begins with risk, not technology. We look at security as a complete program integrating people, processes, technology, operations, and the physical environment. From there, we translate security requirements into designs and specifications and can represent the owner throughout procurement, construction, testing, and commissioning.

The best time is during programming, before major decisions about space, circulation, entrances, infrastructure, and operations are finalized. That allows security to influence the design rather than being added to it later. If your project is already underway, we can review the current design, identify gaps, and help determine the best path forward.

Yes. Our role is highly collaborative. We work alongside your architects and civil, structural, electrical, IT, life safety, and audiovisual consultants, as well as general contractors, security integrators, and other specialty contractors. Our role is to ensure security requirements are clearly defined, incorporated into the broader project, and carried through from programming and design to installation, testing, and commissioning.

Yes, when appropriate. We recommend and specify the technologies and manufacturers that best align with your security requirements, operations, existing infrastructure, and long-term needs. Because SRMC has no financial relationship with manufacturers or integrators, our recommendations are based solely on what is best for your organization.

Yes. SRMC can provide project management and implementation oversight throughout installation. We coordinate with the security integrator and project team, review submittals and shop drawings, monitor progress, observe acceptance testing, and support commissioning to help ensure the completed systems align with the approved design and perform as intended.

Yes. Physical security systems increasingly rely on network-connected cameras, controllers, servers, workstations, and other devices that must align with your organization’s IT and cybersecurity requirements. SRMC coordinates with your IT and cybersecurity teams to evaluate system architecture, network requirements, device compatibility, and applicable security standards so cybersecurity considerations are incorporated into the design and implementation.

Start With Security. Design With Confidence.

Whether your project is still a concept or already in design or construction, SRMC can help. Start with a discovery call to discuss where you are, what you need, and where our independent security expertise can add the most value.